Doc.-ID: 220815-PT10BA-ES-RoughCam IPM2036_en_rev.00.docx, Page 21 of 28
6
Working inside the camera housing
The customer may open the housing only if it is absolutely necessary. Only exchanging
the SD memory card or a hardware reset are reasons for this.
6.1
Preparation for work:
Attention!
Prepare your work carefully and in accordance with the relevant
regulations.
6.2
Opening the housing
If the RoughCam IPM2036 is equipped with a weather protection roof this has to be re-
moved prior to starting your work! To do so, loosen the 4x12mm button head screws
M4*0.7 at the front and rear sides of the bracket holders (Figure 6-1).
Figure 6-1 Removing the weather protection roof (1/2) (this illustration is an example)
Figure 6-2 Removing the weather protection roof (2/2) (similar illustration)
