Samcon ExCam IPM2036 User Manual Download Page 33 | Manualshive

Page: 33 / 36

Samcon ExCam IPM2036 User Manual Download Page 33

Doc.-ID: 220607-PT08BA-ES-ExCam IPM2036_en_rev.00.docx, Page 33 of 36

Repairs may only be carried out with original parts of SAMCON Prozessleittechnik
GmbH. Damaged pressure-resistant housings have to be replaced completely. In case of
doubt, send the part in question back to SAMCON Prozessleittechnik GmbH.
Reparations concerning the explosion protection must only be carried out in accordance
with nationally applied regulations by SAMCON Prozessleittechnik GmbH or by an au-
thorised electrical technician authorised by SAMCON Prozessleittechnik GmbH. Rebuild-
ing of or alterations to the devices are not permitted.

9

Disposal / Recycling

When disposing of the device, nationally applicable regulations must be observed.
This Document is subject to alterations and additions.

10

Drawings & 3D models

All drawings, 3D models, certificates and other information are available in the download
area of the product page on our website:

https://www.samcon.eu/en/products/network/excam-ipm2036/

«
...
31
32
33
34
35
...
»

Summary of Contents for ExCam IPM2036





































Reviews:

No comments