Doc.-ID: 220607-PT08BA-ES-ExCam IPM2036_en_rev.00.docx, Page 31 of 36
7
Network access and visualization
The most important procedures of the first starting up the camera are described below.
The configuration menu of the web surface allows an intuitive navigation and offers sev-
eral configuration possibilities. For detailed documentation and information how to use
the web Interface, please see the User Manual for Axis or visit the following website:
https://help.axis.com/axis-m2036-le
https://help.axis.com/api/download/um_m20_bullet_camera_series_t10175189_de_2204.
pdf
The delivered ExCam IPM2036 is set to the applicable net frequency (50Hz or 60Hz). If
the camera is used at a location with a differing net frequency, the image might start to
flicker, particularly in surroundings with fluorescent tubes. In such a case, the applicable
settin
gs have to be carried out inside the menu “System Options > Advanced > Plain
Config”.
User:
root
Password: root
7.1
Browser Support
A list of the currently supported web browsers, operating systems, required add-ons, etc.
can be viewed at:
https://help.axis.com/access-your-device
7.2
Assigning the IP address
The ExCam IPM2036 is intended for use in an Ethernet network and requires an IP ad-
dress to access and control it. In the most today’s networks, a DHCP server is integrated.
This server automatically assigns an IP address.
If there is no DHCP server available in the network, the IP default address of ExCam
IPM2036
is “
192
.168.0.90” (subnet masking 255.255.255.0)
.
With the “AXIS IP Utility”, it is possible to determine the IP address under Windows; the
included USB stick contains this application.
https://www.axis.com/support/tools/axis-ip-utility
