Doc.-ID: 220607-PT08BA-ES-ExCam IPM2036_en_rev.00.docx, Page 15 of 36
Wiring table:
Potential
Colour (IEC 60757)
Cross-
section
Comment
PA
GN/YE
4 mm
2
(rigid)
Terminal: Slotted screw M4x0.7 (DIN 84) with
washer Ø9mm (DIN 125A),
Keep 3 Nm tightening torque!
Table 5-1 Potential equalization
5.2
Connection work at the device (terminal box) and fuses
ExCam IPM2036 (PoE+) (Camera and Heater)
Power supply:
PoE, IEEE 802.3at type 2 class 4
Reference power:
48 V DC (44...54 V DC)
Maximum power input:
25.5 W (30 W from the PSD)
Typical power input:
12.95 W
Power supply for the camera (PoE)
Voltage supply:
PoE, IEEE 802.3af/802.3at type 1 class 3
Reference voltage:
+48 V DC (44...54 V DC)
Maximum power consumption:
12.95 W
Typical power consumption:
5.0 W
The figures 5.2 and 5.3 illustrate the potential cable terminations of the ExCam IPM2036.
Possible terminations are: terminal box or plug.
Figure 5-2 ExCam IPM2036 T08-VA2.1.K1.BOR-L.H-xxx.N-
T
Figure 5-3 ExCam IPM2036 T08-VA2.1.K1.BOR-L.H-xxx.N-
P