Doc.-ID: 190314-PT08BA-ES-ExCam XF-P1367_EN_rev.00.docx, Page 28 of 32
The delivered ExCam XF P1367 is set to the applicable net frequency (50Hz or 60Hz). If
the camera is used at a location with a differing net frequency, the image might start to
flicker, particularly in surroundings with fluorescent tubes. In such a case, the applicable
settings have to be carried out within the menu “System Options > Advanced > Plain
Config”.
User:
root
Password: root
8.1
Browser Support
A list of the currently supported web browsers, operating systems, required add-ons, etc.
can be viewed at:
http://www.axis.com/techsup/cam_servers/tech_notes/browsers.htm
8.2
Assigning the IP address
The ExCam XF P1367 is intended for use in an Ethernet network and requires an IP ad-
dress to access and control it. In most of
today’s networks, a DHCP server is integrated.
This server automatically assigns an IP address.
If there is no DHCP server available in the network, the IP default address of
ExCam XF P1367 is “
192.168.0.90” (subnet masking 255.255.255.0)
.
With the “AXIS IP Utility”, it is possible to determine the IP address under Windows; the
included USB stick contains this application.
If it is not possible to assign the IP address, it might be necessary to
change the firewall settings!
The “AXIS IP Utility” tool automatically recognizes all ExCam devices and visualises
them in the device list. It can also be used to manually assign a static IP address. For this
purpose, the ExCam XF P1367 network camera should be installed in the same physical
network segment (physical subnet) as the computer on which the AXIS IP Utility is run-
ning. The network signature of ExCam XF P1367 is "AXIS P1367" (see Fig. 8-1). MAC
address and serial number for clear device identification are also detected and displayed.
