8
IMPACT
SILAGE ROLLER
O
PERATOR’S MANUAL
❑
No person should be allowed to stand between the tractor and the machine, without the tractor and
machine being secured against movement or accidental start-up!
❑
The operator is responsible and accountable for:
o
The regional and workplace specific regulations are adhered to and followed by
personnel at all times.
o
Operation is done only in technically proficient condition.
o
The maintenance and repair procedures specified in the manual are adhered to and
documented in writing.
❑
Before exiting the tractor cabin, the tractor must be secured against movement and accidental
start-up.
4.3.
Safety instructions and initial START-UP
❑
The tractor and implement combination must be verified by qualified personnel to ensure
compliance with the safety instructions before initial start-up.
❑
Only people involved in the operation and start-up of the machine are to be allowed within the
operating area.
❑
All loads, features, and functions are to be verified by qualified personnel.
4.4.
Safety instructions and maintenance
❑
All maintenance, repairs, cleaning, and adjustments must be carried out with the machine stationary
position with the tractor switched-off! Secured against accidental start-up!
❑
Verify that all bolts and nuts are tight and retighten if necessary.
❑
Use suitable tools and PPE (work clothes, safety shoes, gloves, and protection) when working on
the equipment.
❑
Properly dispose of oil, grease, and filters.
❑
When undertaking electrical welding, the machine must be disconnected from the tractor.
❑
Spare parts must meet the technical specifications of the manufacturer. For example, original
spare parts.
❑
Maintenance work must only be carried out by qualified personnel.
❑
Before carrying out maintenance work, turn-off the tractor and secure it against accidental start-up.
❑
Any moving parts must be secured against movement.
❑
Use only proper and functioning tools.
❑
For safe operation, maintenance work must be performed at the scheduled and recommended
intervals.
4.5.
Safety instructions for operation
❑
Only qualified people are to operate this machine.
❑
People operating this machine must be instructed regarding its operation and prove that they
understand it’s operation before use.
❑
The appropriate safety equipment must be determined by the operator and ensure that it meets
local safety requirements.
❑
Prior to operation, the machine should be inspected by the operator to ensure proper condition.
❑
In the event of defect or faults during operation, work with the machine should be stopped
immediately, and an inspection followed by appropriate action to remedy the situation undertaken.