Sam4s NR-300 Series, Operator'S Manual

Page: 31 / 176

SAM4s NR-300 Series Operator's & Programming Manual v.1.0 Operations
•
31
Coded Sign-On
If the code entry sign-on method is selected, press the clerk key, enter the clerk code, and
then press the clerk key again.
To sign the clerk off, enter 0 (Zero) and press the clerk key.
Receipt On and Off Function Key
1. Move to the REG position.
2. Press the function labeled RECEIPT ON/OFF to toggle the
receipt On / Off
RECPT OFF
ON
Receipt On and Off Access Menu
1. Move to the X position.
2. Enter CASH key
3. Enter DOWN key 2 times
.
4. Enter CASH key
Enter ‘0’ or ‘1’
0 CLERK
CLERK CLERK
Clerk Code (up to 6 digits)
MANAGER MODE
0.00
REPORT MODE
0. X REPORT →
REPORT MODE
0. RCPT ON/OF F →
RCPT ON/OFF
ON:0 / OFF:1