Sam4s NR-300 Series, Operator'S Manual

Page: 22 / 176

22
•
Getting Started SAM4s NR-300 Series Operator's & Programming Manual v.1.0
Programming Straight Percentage Tax Rate
The NR-300 Series has the capability to support four separate taxes.
Taxes can be calculated as either a straight percentage rate of between .001% and 99.999%, or a 60 break
point tax table. Each tax may be either an add-on tax (added to the cost of a taxable item), or a value added
tax (VAT) that is included in the price of the item.

If you are entering a tax rate (add-on or VAT), see "Straight Percentage Tax Rate Programming"
to enter the percentage rate.

If you are
entering a tax table, see “Tax Table Programming” to enter the tax break points.
accurately, contact your dealer for assistance.
Tax Programming
Enter CASH key
Enter CASH key
* Description Program
- Use Alpha-Overlay or Code Entry Method.
- If you not change the description, Enter only CASH key.
Current TAX1 is programmed by “ADD
-
ON” option.
If you want to change TAX SYSTEM to VAT or TAX TABLE, select othe option
by “
↑ ”
or
“ ↓ ”
key. And enter CASH key.
NOTE) If you don't want to change or to select next option, Enter Only CASH key.
Enter tax rate and input CASH key to finish TAX
PROGRAM MODE
2. SALES TAX
SALES TAX
0. TAX 1
TAX1
TAX1
TAX1 ADD-ON
ADD- ON →
TAX1 ADD-ON
VAT →
TAX1 ADD-ON
TAX TABLE →
TAX1
RATE 0.000