Sam4s NR-300 Series, Operator'S Manual

Page: 15 / 176

SAM4s NR-300 Series Operator's & Programming Manual v.1.0 Introduction
•
15
Mode Change
Mode Select Method
The Mode key can be changed by either pressing the key until the indicator is shown
under the correct mode on the display i.e.
VOID, OFF, REG, X, Z, P, S

To select register press the MODE key until the display shows an indicator under
REG
MODE
Fast Track Method
Use the fast track method by entering the number of the mode required and press the
mode key. I.e.
VOID:1, OFF:2, REG:3, X:4, Z:5, P:6, S:7
For Example pressing 3 then the MODE key will access Register Mode

To select Register Mode using the fast track method enter 3 for REG and press the
MODE key
MODE 3