Sirius 800 Series User Manual
Enabling/Disabling Video/Audio Redundancy
Crosspoint Modules 10.6
Iss 5 Rev 7
Page 172
© 2017 SAM
10.6.2 Audio Redundancy - Nucleus2 Controller Only
The audio redundant crosspoint algorithm is enabled or disabled by using the Online Editor.
See the Workbench manual for information on using the Online Editor.
Nucleus2 Controller Navigate to:
Devices | Devices[1]: LocalRouterDevice | LocalRouterControl |
RouterSpecificControl: Sirius800Control | RedundantAudioXpntControl
| Enabled = True
Select the required action from the drop down menu:
•
Redundant crosspoint algorithm enabled =
True
•
Redundant crosspoint algorithm disabled =
False
Important:
•
If audio redundancy is enabled or disabled the controller must be reset for the new
setting to take effect.
•
If the action on fail setting (see section 10.7) for video or audio needs to be
changed make these changes at the same time and only one database push is
then required.
•
In a dual controller system both controllers must have the same redundancy
settings.
