Sirius 800 Series User Manual
Multiviewer Modules and Rear Panels
Modules No Longer Supplied With New Systems C.6
Iss 5 Rev 7
Page 346
© 2017 SAM
C.6.3 5932 Sirius 850 Multiviewer Output Module
The 5932 Sirius 850 multiviewer output module takes the multiviewer output signals from the
multiviewer crosspoint module and passes each signal through a re-clocker. Each 5932
module has 72 Outputs.
The output of the 5932 is connected to one of the two possible rear panel arrangements in
order to link to an external multiviewer system. One 5932 multiviewer output module is
required for each rear panel fitted.
Figure 221 5932 Sirius 850 Multiviewer Output Module
Sirius 850:
1370 Rear Panel - up to two
Up to 2 rear panels with 48 HD BNC connectors per rear panel
(up to 96 multiviewer outputs).
see section 13.11 for details.
Sirius 850:
1291 Rear Panel - up to two
No longer supplied and
shown here for users that
already have them fitted.
Up to 2 rear panels with 48 Coax DIN 1.0/2.3 connectors per
rear panel (up to 96 multiviewer outputs).
see section C.6.2 for details.
Sirius 850:
1292 Rear Panel- up to two
No longer supplied and
shown here for users that
already have them fitted.
Up to two rear panels with nine MV-Link connectors per rear
panel. The 1292 rear panel is an interface to the Miranda
KaleidoX multiviewer.
Fitting one rear panel supplies 72 outputs and fitting two rear
panels supplies 140 outputs.
see section C.6.4 for details.
Table 110 5932 Sirius 850 Multiviewer Output Module - Possible Rear Panel Arrangements
Connectors to
the Motherboard
LEDs
