Sirius 800 Series User Manual
Multiviewer Modules and Rear Panels
Modules No Longer Supplied With New Systems C.6
Iss 5 Rev 7
Page 344
© 2017 SAM
C.6 Multiviewer Modules and Rear Panels
C.6.1 1309 Sirius 830/840 Multiviewer Coax Rear Panel
The 1309 Sirius 830/840 multiviewer coax rear panel has 48 DIN 1.0/2.3 connectors.
The 1309 rear panel is compatible with the 5931 external multiviewer output module
(see section 13.6). One 5931 module is required to drive each of the 1309 48 channel rear
panels. Up to three 1309 rear panels can be fitted to the Sirius 830 or Sirius 840 router
frames.
Note:
•
The 1309 Sirius 830/840 multiviewer coax rear panel was supplied with earlier
Sirius 830 and 840 router systems and is shown here for users that already have
them fitted.
•
The 1309 rear panel is no longer supplied with new systems but is available as a
spares replacement if required.
•
If the system is being expanded with a second or third 5931 external multiviewer
output module the 1369 Sirius 830/840
external
multiviewer HD BNC rear panel can
Figure 219 1309 Sirius 830/840 Multiviewer Coax Rear Panel
If one 1309 rear panel is used it is fitted in the bottom multiviewer
slot and numbered as follows:
48
2
47
1
96
95
50
49
If two 1309 rear panels are used then the second rear panel is
fitted in the middle multiviewer slot and numbered as follows:
Not Used
Not Used
98
97
If three 1309 rear panels are used then the third rear panel is
fitted in the top multiviewer slot and numbered as follows:
140
139
