Salzburger Getreidemühlen MT 18 D, Instruction Manual, Page: 9 / 28

9
13. The safety devices must not be changed or switched off.
14. Immediately switch off the device if malfunctions occur and pull out the plug.
15. Do not pull the plug out of the socket by the supply cable.
16. Always use the mill only on a level, stable surface. The mill must be set up in
such a way that it is impossible for the mill itself and the collecting container
for the ground material to slip off during the grinding process. It is best to
place the mill on a hard surface, such as kitchen countertop. This will ensure
that the ventilation slots on the underside of the unit, which are used to
ventilate the motor, are unobstructed.
17. The device may only be operated by children under strict supervision.
18. Strict supervision of the device is also required when the mill is used near
children.
19. Keep the device out of the reach of children.
20. The device must not be operated by persons who are physically or mentally
impaired or who do not have the experience or knowledge required to operate
the device properly.
The exception is persons who are supervised by a person
responsible for their safety.
21. Do not place the device or parts of the device in water or other liquids.
Never insert a wet plug into a socket or touch it with wet hands.
22. Screw connections of the device that can only be opened with a tool must
not be opened
23. Industrial motors can be damaged by prolonged idling. Therefore, please
switch off the mill immediately after use.
Intended use
The MT 18 D mill is designed and constructed for commercial use. The device is
designed for grinding the types of grain listed in the operating instructions and
similar.
You can find more information on our website
www.getreidemuehle.com under "Mill comparison".