Salvus L1 Manual Download Page 4

 

 

1.

 

General safety advice 

 

Please read the entire manual before you start using the safe. Incorrect use and failure to 
heed warnings and follow instructions may lead to serious injury. 

 

This safe is intended for storing and charging lithium-ion and other batteries. Only use 

original manufacturers’ batteries and heed

 all warnings, instructions, illustrations and 

information supplied with the battery. 

 

Never change the safe settings yourself, always contact the Nauta Service Team. 

 

Only allow qualified and skilled personnel to repair the electrical system and only allow those 
repairs to be undertaken with original parts. 

 

The service hatch must only be opened for safety and security inspections and only by the 
Nauta Service Team and qualified, skilled personnel. 

 

Always keep the safe door closed so that any fire is limited to inside the safe. 

 

Never open the safe door yourself if the alarm sounds. Telephone the emergency services 
and leave it to the fire brigade to open the safe. 

 

Never impede the smoke duct and the ventilation grill by placing anything on top of the safe. 

 

Place the safe in a well-ventilated room. In the event of a fire, poisonous gases may be 
discharged. 

 

Ensure that no unauthorised person who has not been instructed in the safe

’s use gains 

access to it. 

 

A CEE-form plug is attached to the lithium-ion battery safe. Ensure that the voltage of the 
electricity source corresponds with that of the plug. 

 

Never exceed the maximum amperage indicated. 

 

Only use original, undamaged cables and plugs for charging batteries. 

 

Plug the charger directly into the charging point in the safe and never into a multiple socket 
and/or extension cable. 

 

Make sure that the fuse switch in the safe is up (position 1). The fuse switch is inside the safe 
on the outside of the lowest technical compartment. 

 

2.

 

Guarantee 

The manufacturer Nauta provides a warranty period of 24 months from the date of delivery on the 
safes specified in the manual. 

 

3.

 

Transport 

Move the safe in an upright position with a pallet truck. We recommend that you have the safe 
placed in its intended location by a specialist company. 

Improper transport may lead to hidden damage to safes and to their fire proofing and fire protection. 

 

 

Summary of Contents for L1













Reviews: