Printer Operation
Connecting a Printer
Printer Requirements
In order to connect a printer with the serial RS232 Interface of the System following requirements must be
fulfilled : Serial RS232 Interface, Min. 1200 Baud Transfer Rate
Pin Layout RS232 DB9 Connector System:
Used Pins: 2:TxD , 3:RxD and 5:Signal Ground
Data format: 8 Data Bits, 1 Stop Bit, No Parity
Sample for Printing
Sample printout of a stored program
See also [ Print Program ]
Ä
2.5
Sample printout of a running log
See also Print Interval
Ä
3.5
Program #1
Step: 1
Set Temperature:
130,0 °C
Gradient 1,5
°C/Min
Hold Time:
2:30 HHH:MM
Fan Speed
100 %
Step 2
Set Temperature:
180,0 °C
Gradient 1,5
°C/Min
Hold Time:
0:45 HHH:MM
Fan Speed
80 %
10.04.07, 09:34
Set Temperature:
130,5 °C
Act Temperature:
130.6 °C
Gradient 1,5
°C/Min
Hold Time:
1:00 HHH:MM
Fan Speed
94 %
10.04.07, 09:35
Set Temperature:
130,5 °C
Act Temperature:
130.5 °C
Gradient 1,5
°C/Min
Hold Time:
1:00 HHH:MM
Fan Speed
94 %
Copyright© SalvisLab / Edition 191107
- 29 -
