- 18 -
Copyright © SalvisLab / Edition 191107
2.2 Menu Program New
The storage capacity is 50 Programs with 15 Steps/Program. Each Step contains of a Set-Temperature, a
Gradient, a Hold-Time and a Fan-Speed.
The sample here assumes creating a program #4 with 2 Steps
Menu
_
Program
____
_
New
_
Program
__
Create a new program
confirm menu choice
Ä
2.2.1
T
/
S
scroll through the Menu-Program.
ESC
returns to
Ä
2
2.2.1 Create a new program
Program # ?
__
_____________
P04
+/-
select desired program number
confirms the choice
Ä
2.2.2
ESC
returns to
Ä
2.2
Note
: Only free program numbers will appear in the display.
2.2.2 Set Temperature – Step 1
Set
_
Temperature
_
04/01
_____
90.5°C
+/-
change desired value. Pre-set value is the last used value in
manual mode.
confirm and saves
Ä
2.2.3
ESC
restores the old value or returns to
Ä
2.2
and the step 1 as
well as selected program number is not stored !
Note:
Display 04/01 means actual program/step number.
2.2.3 Set Gradient – Step 1
Gradient
04/01
__
1.5°C/Min
+/-
change desired value
confirms the value
Ä
2.2.4
ESC
restores the old value or returns to
Ä
2.2
and the step 1 as
well as selected program number is not stored !
Note:
A value of 0:0 means maximal gradient
2.2.4 Set holding time (dwell time) – Step 1
Hold
_
Time
04/01
_
H:M
_
21:00
+/-
Change desired value
confirm value and skips to the next input field (HH
Ä
MM) or
stores the time and go to
Ä
2.2.5
ESC
restores the old value and skips back one input field
(M
Ä
H) or goes back to
Ä
2.2
and the step 1 as well as selected
program number is not stored !
Note
: A value of 0:00 means endless holding time
2.2.5 Set Fan Speed – Step 1
Fan
_
Speed
04/01
_______
100%
+/-
change desired value
confirm value
Ä
2.2.6
ESC
restores the old value or returns to
Ä
2.2
Note:
The minimal Fan Speed is depending on the system and
is factory set.
