Salvislab Thermocenter TC40, User Manual

Page: 17 / 37

2.1 Menu Program Start
Menu _ Program ____
_ Start
Start an existing program
confirm menu choice Ä 2.1.1
T / S scroll through the sub-menu.
ESC returns to Ä 2
2.1.1 Select Program #
Program # ?
P04
+/- select desired program number
confirm value Ä 2.1.2
ESC returns to Ä 2.1
Note:
Only stored only program numbers with content will
appear in the display. If no program exist a beep-message will
displayed.
2.1.2 Choose type of program start
Start _ Prog ___ P04
Now _ Delayed
+/- select type of program start
accept choice
If Now selected: System starts immediately Ä 6
If Delayed selected :
Ä
2.1.3
ESC returns to Ä 2.1
2.1.3 Set Start Date
Start Date ___ P04
DDMMYY __ 15.05.07
+/- Change desired value
confirm value and skips to the next input field (DD
Ä
MM,
MM Ä YY) or stores the date and go to Ä 2.1.4
ESC restores the old value and skips back one input field
(YY Ä MM, MM Ä DD) or goes back to Ä 2.1
Note : The pre-set date is the actual date from the real-time
clock.
2.1.4 Set Start Time
Start Time ___ P04
HH:MM ______ 13:10
+/- Change desired value
confirm value and skips to the next input field (HH
Ä
MM) or
stores the time and go to :
If the Start Date and/or Start Time is in the
past , the display will
return back to Ä 2.1.2
If your Start Date and/or Start Time is in the future you will see
the operating display Ä 7
ESC restores the old value and skips back one input field
(MM Ä HH) or goes back to Ä 2.1
Note : The pre-set time is the actual time from the real-time clock.
Copyright© SalvisLab / Edition 191107 - 17 -