Operating Instructions
68 / 92
11.2
Data import: information about the "Replace/Add" option
Area
Import
Sounds
Import options
Replace
Add
Import
Images
Cookbooks
User configuration
When you call up the menu, "Add" is enabled.
Attention: with the "Replace" function, the folder content is first
deleted, then data is copied from the USB stick.
Function
"Replace" means:
1. All files in the relevant folder of the
control unit are deleted.
2. The files from the USB stick are copied
to the relevant folder.
Caution!
Example: if the control unit contains three
cookbooks, but there is only one cook
book on the USB stick, the "Replace"
function will only copy one cookbook to
the control unit. This means that the con
trol unit will contain only one cookbook.
Should be used if you want to standardize
data across all appliances (e.g. standard
ize cookbooks in all appliances).
"Add" means:
Add files.
When to use
Should be used if you want to add data
with a new file name.
Sounds
1. Attention! All existing sounds in the
"sounds" folder will be deleted.
2. The sounds on the USB stick are
copied to the "sounds" folder.
Sounds with different file names are
added to the "sounds" folder.
Sounds with identical file names are not
changed.
Images
1. Attention! All existing images in the
"pictograms" folder will be deleted.
2. The images on the USB stick are
copied to the "pictograms" folder.
Images with different file names are
added to the "pictograms" folder.
Images with identical file names are not
changed.
Cook
books
1. Attention! All existing cookbooks in the
"cookbooks" folder will be deleted.
2. The cookbooks on the USB stick are
copied to the "cookbooks" folder.
Cookbooks with different file names are
added to the "cookbooks" folder.
Cookbooks with identical file names are
not changed or overwritten.
Example: The cookbook "Kochbuch_DE"
exists. To add "cookbook_EN", the cor
rect import function in this case is "Add".
User con
figuration
The "userconfigmain.cfg" and "special
preps.xml" files are overwritten.
The appliance must be restarted to acti
vate the new user configuration.
No function!
