background image

STARTING SERIAL NUMBER

  MODEL 

VOLTAGE 

PHASE 

SERIAL NO.

 75 

115/230 

72139

 75 

208 

71135

 75 

208-230/460 

73142

 100 

115/230 

9318

 100 

208 

3709

 100 

208-230/460 

8401

 150 

115/230 

152115

 150 

208 

151144

 150 

208-230/460 

153322

 200 

115/230 

6169

 200 

208 

3698

 200 

208-230/460 

16441

 300 

208-230/460 

11850

 500 

208-230/460 

8472

 750 

208-230/460 

5100

These instructions are designed to assist in the rebuilding of Salvajor Disposers.

Not all parts in this kit will be identical matches to the parts removed. 

The changes made are part of our ongoing commitment to quality, 

increased longevity and durability of Salvajor Disposers.

All repairs should be made according to local codes and by a qualified technician.

SEAL KIT REPLACEMENT

Series G, H & J 

Part Number KSH123

(For Disposer Models 75-750)

Manufacturers of Commercial Food Waste Solutions - 

Since 1944

Summary of Contents for G Series

Page 1: ...0 3 8472 750 208 230 460 3 5100 These instructions are designed to assist in the rebuilding of Salvajor Disposers Not all parts in this kit will be identical matches to the parts removed The changes made are part of our ongoing commitment to quality increased longevity and durability of Salvajor Disposers All repairs should be made according to local codes and by a qualified technician SEAL KIT RE...

Page 2: ...e stationary cutter is the shredder and the cutter in the middle that spins is the face plate The piece under the face plate is the rotor base Remove the shredder by inserting a screwdriver in between the face plate and the shredder and pry it out Remove the 1 1 4 rotor nut 1 10 hp or the 3 8 rotor bolt older style 1 hp Lift face plate off the motor shaft remove the rotor shaft gasket and the roto...

Page 3: ... by tapping on the insert Step 7 Place the new o ring 11026 on the larger end of the the motor rotor shaft and new o ring 996020 on the smaller end in the slots provided and insert the motor rotor shaft larger threaded end into the disposer housing mak ing sure it bottoms out in the top bearing cup cone Once the motor rotor shaft is in place turn the disposer upright onto a prop such as a block of...

Page 4: ...lace the friction washer 996024 over the threaded end of the motor shaft and on top of the drive washer Step 16 Place the wavy washer 987003 over the shaft and locate it on the drive washer around the outside of the friction washer Step 17 Place the retaining washer 987001 over the shaft and up against the wavy washer and the friction washer Step 18 Screw the 1 2 castle nut 997050 on the motor rot...

Reviews: