Saluki SFS-7000 Series, User Manual

Page: 57 / 63

45
Dust combustion
1) Poor quality of fiber
end face.
2) Dust is not cleaned or
cleared when cleaning
the fiber or discharging.
1) Check the fiber
cleaver working state.
2) Clear the fiber or
increase the [cleaning
discharging time].
Bubble
1) Poor quality of fiber
end face.
2) Low discharging
strength or short
discharging time.
1) Check the fiber
cleaver working state.
2) Enlarge [discharging
strength] and/or
[discharging time].
Fiber separation
1) Fiber pushing is too
small.
2) High discharging
strength or long
discharging time.
1) Perform [ARC
calibration]
maintenance.
2) Reduce [discharging
strength] and/or
[discharging time].
Too thick Fiber pushing is too big.
Reduce [overlap
amount] and execute
[ARC calibration].