Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
12
1.6 DC Outputs and Scaling
The SE2031 has Channel 1 and Channel 2 outputs (CH1 and CH2) on the front panel.
CH1 and CH2 Outputs and Display
The output range of CH1 and CH2 is from -10V to 10V.
The output signal is proportional to the value of the test signal and the setting scale. Otherwise, the SE2031 shows the
values of CH1 and CH2 on the front panel, including the value of X, Y, R,
θ
of the test signal. The display interface of
SE2031 is shown in Fig.6.
SE2031 can display the value of CH1 and CH2 through bars in addition to numbers. To discover the changes of data, you
can observe the data in the time region.
Fig.6 Display Interface of SE2031
Fig.7 Polar Display Mode
Otherwise, SE2031 can use polar coordinates to display the vector combined with the co-phase and quadrature
