23
Tel: 886.909 602 109 Email: [email protected]
5.
Troubleshooting
5.1.
ConnectionFail
Description
When IP address/GIPB address is configured. Click [Connect] button. A Notice Box pops out. Connection fails
Solution
Check if the control computer and VNA are firmly connected.
Check the physical port of VNA/computer is well contacted with the connector of the cable.
Check and confirm the IP/GPIB address.
Replace the connection cable.
5.2.
USB Connected Error
Description
Warning information is show in Measurement window.
Solution
Check the USB cable is firmly connected both ends.
Click [Reconnect] button
