65
Tel: 886.909 602 109 Email: [email protected]
Figure 9-18 10MHz Reference Internal and External Input
4) When Frequency Reference is as [Freq Ref Int Ext], 10MHz reference clock can be externally output via 10MHz port. Click [Ref
Output Off On] menu on system menu. 10MHz clock reference outputs externally through port when it is displayed as [Ref Output
Off On]. Analyzer can provide 10MHz clock reference for other testing equipment.
9.10.
Measurement Guide
S3101 Cable & Antenna Analyzer provides measurement guide function (This function is not applicable under power meter measurement
mode.) for faster and more convenient master of basic operation of several measurement format. You may get the knowledge of basic
measurement setting etc. of measurement with the three basic measurement types provided in measurement guide. Steps of entering
measurement guide function are as follows:
1) Press
【
System/Local
】
key and enter system menu bar;
2) Click [Next] menu and enter the second page of system menu bar;
3) Click [Wizard] menu to bring up “Wizard” on the top of plot area;
4) You may select measurement mode you need to know on element brought up and click “Enter” key to check its measurement
process. As shown in Figure 9-19:
