62
Tel: 886.909 602 109 Email: [email protected]
Figure 9-14 LAN—Gateway
7) After configuration is completed, click “OK” key or
【
Enter
】
key to complete LAN setting.
9.7.3.
Touch Screen Calibration
Touch precision of touch screen will be calibrated before delivery. However, you may recalibrate touch screen for low precision of touch
screen response caused by accident. You may recalibrate touch screen using these two methods below:
1. Calibration with mouse: connect mouse to USB A type interface of digital interface and perform Touch Screen Calibration following
the steps below:
a) Press
【
System/Local
】
key and enter system menu bar;
b) Click [Config] menu with mouse and enter setting menu bar;
c) Click [Touch Calibrate] menu with mouse to bring up Touch Screen Calibration page
2. Calibration with combination key: switch menu and complete Touch Screen Calibration with combination keys provided by
instrument. Detailed operating steps are as follows:
a) Press
【
System/Local
】
and
【
↑
】
keys simultaneously then a menu in menu bar will be circled by red frame, as shown in
Figure 9-15:
