background image

INITIAL PREPERATION

Ensure minimum salt level 4000ppm. If the pool is new to saltwater acquire ideal salt level of 

5000ppm by adding 50kg per 10,000 litres (a standard 50,000 litre pool would require 250 kg salt) 

at start up. 

If salt level needs to be risen, after adding required salt super chlorinate pool with liquid chlorine 

or sodium dichlor (raise chlorine level to 3-4ppm). Turn the chlorinator cell to “off” and turn pump 

switch to “man” to start filtration system for a minimum period of 24 hours. 
After the 24 hour period, or if the salt is at the required level turn the cell switch to “on” and the 

pump switch to “manual” or  “auto”.

RECOMMENDED LEVELS TO ENSURE OPTIMAL OPERATION

Pool chemistry should be tested at least once a week during summer months.

Salt Level

4000ppm - 6000ppm by weight with 5000ppm being ideal (never below 4000ppm). All Saltmate 

models are over-salt protected and can run with levels higher than 6000ppm (ie: sea water)

Free Chlorine

1.5ppm - 3.0ppm depending on the time of day, and period of time since the chlorinator has 

been running. Adjust by altering the chlorine output level or the operating hours. If levels have 

become too low manual super chlorination may be required.

pH and Total Alkalinity

A pH of 7.2 to 7.6 and a total alkalinity of 80ppm - 120ppm unless advised otherwise by your 

pool professional. Fibreglass pool suppliers usually recommend a pH of 6.9 to 7.2. To lower the 

pH and total alkalinity add hydrochloric acid, to raise the pH and total alkalinity add sodium 

bicarbonate. These levels may not be achievable with some water supplies.

Stabiliser

40-80ppm, pool stabiliser, also called cyanuric acid helps the chlorine produced to last longer. 

Without it in your water your chlorinator will need to run longer than it otherwise would.

Hardness

100 to 250 ppm. Levels higher than the recommended level will result in a less efficient cell in 

regards to its chlorine production, a more frequent need for cleaning, and a chance the cell will 

fail prematurely. To minimise chances of high hardness levels minimise or avoid the use of 

chemicals containing calcium, especially, “Calcium Hardness” and calcium-based granular 

chlorine.

Chemical Maintenance

Summary of Contents for RP20













Reviews: