Saltillo Chat Fusion 8, User Manual, Page: 190 / 320

ChatFusion User’s Guide 190
Dwell Method: Clicker-Picker
The dwell method Clicker-Picker is click-oriented. This method is most
useful for frequent click operations. For example, the user may find this
method useful when playing a game app.
When the user first aims the pointer, it is at maximum size and it shrinks
according to the specified dwell time. When the pointer reaches its
minimum size, a three-section cursor is displayed. The three sections
represent click, long-click, and drag.
Section How to Use
Click
Focus on a button and move the pointer over the top
(green) section to make a selection.
Long-
click
Focus on a button and move the pointer over the lower-
right (yellow) section to activate additional functionality.
Drag
Focus on a button and move the pointer over the lower-
left (red) section to change the pointer to a drag cursor
. Grab the button and move it where you want it. Hold
the drag cursor within the specified area for the specified
secondary dwell time until drag mode ends, leaving the
button in the new location.
Note: For information on secondary dwell time, see “ Setting Secondary
Dwell Time ” on page 194.
The button on which the pointer is focused is highlighted to help the
user verify that the correct button will be selected.