Salter TOTAL MOTION, Owner'S Manual, Page: 13 / 47

c. Attach 4pcs Swing Arm Covers (80) to the Right
Swing Arm (77, 82)
and fully tighten with 8pcs
Screws (132).
d. Then press 8pcs Screw Caps (79) onto the Swing
Arm Covers (80) .
e. Repeat the above same procedure for the left side.
S
TEP 15
–
Pedal (84) & Non-Slip Pad (83) Assembly
a. Refer to right, 8pcs Bolts, Socket
Head (M8×p1.25×15mm)(136) and
8pcs Washers (8×19×2.0t)(171)
have preassembled on the Pedal
Support Arm (86, 87) .
b. Remove the above Bolts (136) and
Washers (171) .
c. Attach the
Right Pedal (84)
to the
Right Pedal Support Arm (87) and
fully tighten with 4pcs
Bolts (136)
and 4pcs Washers (171) .
d. Place the
Non-Slip Pad (83)
onto the
Right Pedal (84) .
e. Repeat the above same procedure
for the left side.