SALSA BUCKSAW Framesheet Download Page 1

1

10739 01/15

For additional product and safety information go to salsacycles.com/safety

BUCKSAW FRAMESHEET

RETAILER:

 This framesheet MUST BE provided to the end user.

At Salsa, we believe that a sense of adventure makes life better. 
The bicycle can be so much more than just a bike; it’s a path  
to new places, new people, and amazing experiences. 
Thank you for your purchase. We hope it makes a good riding 
experience even better!
Salsa. Adventure by bike.
Thank you for purchasing a Bucksaw! We want to give you 
important information about your bike...

 

WARNING:

 CYCLING CAN BE DANGEROUS. BICYCLE 

PRODUCTS SHOULD BE INSTALLED AND SERVICED BY  
A PROFESSIONAL MECHANIC. NEVER MODIFY YOUR BICYCLE  
OR ACCESSORIES. READ AND FOLLOW ALL PRODUCT 
INSTRUCTIONS AND WARNINGS INCLUDING INFORMATION  
ON THE MANUFACTURER’S WEBSITE. INSPECT YOUR BICYCLE 
BEFORE EVERY RIDE. ALWAYS WEAR A HELMET.

Intended Use: Condition 4 

Frame Compatibility

Please refer to the Split Pivot Suspension Set-Up Guide for 
information on setting proper suspension.

 

WARNING:

DO NOT USE SUSPENSION FORKS EXCEEDING 

511MM AXLE-TO-CROWN. DOING SO WILL VOID THE FRAME 
WARRANTY AND MAY RESULT IN DAMAGE OR FAILURE OF THE 
FRAME AND POSSIBLE INJURY OR DEATH TO THE RIDER.

 

WARNING:

USE ONLY REAR SHOCKS THAT MATCH THE 

SPECIFIED DIMENSIONS (LENGTH AND STROKE). ATTEMPTING 
TO USE OTHER SIZE SHOCKS WILL VOID THE FRAME WARRANTY 
AND MAY RESULT IN DAMAGE OR FAILURE OF THE FRAME AND 
POSSIBLE INJURY OR DEATH TO THE RIDER.
Using shock tunes outside the recommended tune is not 
recommended. Using a different tune may result in less than 
optimal performance.
Please refer to the Split Pivot Suspension Setup Guide for proper 
shock/fork settings to optimize suspension performance.
Please refer to the Bucksaw Pivot Service Kit instructions for 
proper torque spec, bearing sizes, and pivot maintenance.

Wheelsize

26" fatbike

Travel

100mm front and rear

Tire clearance

Up to 26 x 4.0" tires on 82mm rims

Fork

Designed for 100mm, 50 offset RockShox Bluto 
suspension fatbike fork. 511mm max axle-to-crown

Headset-Upper

1-1/8" zero stack (ZS44/28.6)

Headset-Lower

1-1/2" zero stack (ZS56/40)

Rear Shock Size

184 x 44.5mm (7.25 x 1.75")

Rear Shock  
Mount Size

Front: 8 x 22mm; rear: 8 x 38mm

Seatpost

31.6mm

Seat Collar

35.0mm alu/36.4mm carbon; Salsa Lip-Lock 
included

Front Derailleur

High direct mount; 2x compact; top-pull only

Bottom Bracket

PressFit 41 x 121mm

Crankset

Fatbike 1x or 2x compatible; max chainring sizes 
1x (34t), 2x (36/24t)

Rear Brake

51mm I.S., minimum rotor size 140mm,  
maximum rotor size 180mm

Rear Spacing

177 x 12mm thru-axle

Bottle Mounts

1 per frame

Derailleur Hanger

FS2322

Rear Thru-Axle

12 x 217L, TP = 1.75 TL = 20

Cable Routing

Full length housing; 1x, 2x, moto/regular, and 

dropper/stealth dropper routing-compatible

CONDITION

DESCRIPTION

SALSA MODELS

This is a set of conditions for the operation 

of a bicycle on a regular paved surface 

where the tires are intended to maintain 

ground contact.

This is a set of conditions for the operation 

of a bicycle that includes Condition 1 as 

well as unpaved and gravel roads and  

trails with moderate grades. In this set  

of conditions, contact with irregular terrain 

and loss of tire contact with the ground 

may occur. Drops are intended to be limited 

to 15cm (6") or less.

Colossal
Fargo
Vaya
Warbird

This is a set of conditions for operation  

of a bicycle that includes Condition 1 and 

Condition 2 as well as rough trails, rough 

unpaved roads, and rough terrain and 

unimproved trails that require technical 

skills. Jumps and drops are intended  

to be less than 61cm (24").

Beargrease
Blackborow
El Mariachi
Mukluk
Spearfish

This is a set of conditions for operation  

of a bicycle that includes Conditions 1, 2, 

and 3, or downhill grades on rough trails  

at speeds less than 40 km/h (25 mph),  

or both. Jumps are intended to be less  

than 122cm (48").

Bucksaw 
Horsethief

This is a set of conditions for operation of a 

bicycle that includes Conditions 1, 2, 3, and 

4; extreme jumping; or downhill grades on 

rough trails at speeds in excess of 40 km/h 

(25 mph); or a combination thereof.

3

For rough

off-road riding

and jumps less 

than 24" (61cm)

ASTM F2043

For riding on a 

paved surface where 

the tires do not lose

ground contact

ASTM F2043

4

For extreme 

off-road riding

ASTM F2043

5

For dirt jumping

ASTM F2043

Summary of Contents for BUCKSAW









Reviews: