6
7
6 . 5 I N S T R U C T I O N S F O R C O R R E C T M A I N T E N A N C E
It is essential that after each hair washing operation, the operator dries any part of the wash
unit that has become wet.
During regular cleaning operations, remember:
- Do not clean metal parts with acidic products.
- Do not clean painted parts with diluents or aggressive products.
- Clean the parts in Sky Colours only with water and neutral soap.
Check every 2 months that there are no water leaks under the sink that could damage the
base and equipment of the shampoo unit. To complete this operation, remove the column
cover in order to access the area under the basin.
Furthermore, every 6 months:
- GREASE THE MOVING PARTS OF THE MOTOR, THE FRAME JOINTS, AND THE
CONTACT PART OF THE BACKREST MASSAGE ROLLERS. DEPENDING ON THE
FREQUENCY OF USE, LUBRICATE IT WITH SYNTHETIC GREASE SUCH AS TOPAS
NB 52
(see figures 4 and 5).
- check the drainpipe to avoid clogging.
NB: These operations must be compulsorily performed by specialised personnel, after
having previously isolated the power supply.
USER MANUAL
EN
13_ Wash the head taking care not to over-wet the equipment, limiting splashes and water
leaks from the spout.
14_ At the end of the washing operations, IF IN OPERATION, stop the massage (as
described in point 12).
UNDER NO CIRCUMSTANCES ACTIVATE THE MOVEMENT OF THE STRUCTURE
WITH THE MASSAGE IN OPERATION.
15_ Lower the chair and the footrest in the same way as seen at point 8 and have the client
leave the chair.
16_ Disconnect the power plug from the socket when it is not in use.
If
- Strange noises such as buzzing or creaking come from the wash unit
- Strange smells such as burning come from the wash unit
Or
- Parts of the wash unit get too warm
during the normal functioning of equipment, immediately stop any activity, remove the plug
from the socket and inform Salon Habitat Italia Srl Customer Service.
Removing the crankcase for maintenance:
1. Remove the plug from the socket
2. Remove the backrest with your hands
3. Disconnect the massage cable
4. Unscrew the 4 crankcase knobs
5. Remove the casing and proceed with the lubrication of
the PVC back massage cloth
USER MANUAL
EN
fig.4
fig.5
