Salicru UPS SLC TWIN PRO series, User Manual, Page: 5 / 44

5
SALICRU
2. Information for safety.
2.1. Using this manual.
The generic information of the equipment is supplied in digital
format in a CD-ROM, and it includes among other documents
the own user's manual of the system and the EK266*08 docu-
ment concerning to «Safety instructions». Before doing any ac-
tion over the equipment regarding installation or commissioning,
change of location, setting or handling, read them carefully.
This user's manual is intended to provide information regarding
the safety and to give explanations about the procedures for the
installation and operating of the equipment. Read them carefully
and follow the stated steps in the established order.
Compliance as regards to “Safety instructions“ is
mandatory, being the user the legal responsible re-
garding to its observance and application.
The equipments are delivered duly labelled for the correct iden-
tification of any their parts, which combined with the instructions
described in this user's manual, allows the end-user to make any
operating of both installation and commissioning, in an easy and
ordered way without doubt.
Finally, once the equipment is installed and operative, for future
requests or doubts that could arise, it is recommended to keep
the CD-ROM documentation in a safe place with easy access.
The following terms are used in the document indistinctly to be
referred to:
• «SLC TWIN PRO, TWIN PRO, TWIN, PRO, equipment,
unit o UPS».- Uninterruptible Power Supply.
Depending on the context of the sentence, it can be referred
either to the own equipment or to the equipment with bat-
teries, although all is assembled in one cabinet or metallic
enclosure.
• «batteries or accumulators».- Group or set of elements
that store the electron flow through electrochemical means.
• «T.S.S.».- Technical Service & Support.
• «client, fitter, operator or end-user».- are used indistinctly
and by extension, to be referred to the fitter and/or operator
which will make the corresponding actions, being respon-
sible the same person about the actions to take on behalf
of himself.
2.1.1. Conventions and used symbols.
Some symbols can be used and shown in the equipment and/or
in the description of this user's manual.
For more information, see section 1.1.1 of EK266*08 document
as regards to «Safety instructions».