53
BEFORE FIRST USE
1. Remove packaging materials such as cardboard, plastics or Styrofoam and
discard appropriately.
2. Clean all the parts by wiping with a soft damp cloth or sponge and dry
thoroughly.
3. Thoroughly clean the cooking pot in the dishwasher or with warm soapy water.
Rinse, towel or air
-
dry, and place in the pressure cooker.
LID ASSEMBLY:
1. How to open the lid: Hold the
handle (1) firmly while pushing
down on the red lid release
button (22), turn the lid (2)
clockwise until it loosens and lift
vertically (Figures 6
-
7);
Figures 6
-8
the lid (2) can stand on the Lid Rest (20) (Figure 8).
Note: For new units, the seal of the Lid (2) may be slightly stronger than normal and
may be slightly difficult to unlock. Once the Lid (2) has been opened and closed
several times, it will loosen up.
2.
How to close the lid
: Observe
the Rubber Seal Ring (18) inside
the Lid (2) and ensure that it is
fitted onto the lid all the way
around.
Figures 9
-
11
(Caution: If the rubber seal ring is damaged, do not use the pressure cooker.
Contact Customer Service to repair or replace).
