Salda RIS 400 P EKO 3.0 Series, Mounting And Installation Instruction

Page: 5 / 48

EN | 5 RIS 400-700 P EKO 3.0 v2019.06
Automatic control integrated + + + +
Thermal efficiency 90% 90% 90% 90%
Insulation of walls [mm] 30 30 30 30
Cross-section of the power supply cabl [mm²] 3x1,5 3x1,5 3x2,5 3x1,5
Circuit breaker*
Poles 1 1 1 1
I [A] B6 B10 C16 Fuse 5A
RIS EKO 3.0 700PE 1.2 700PE 3.0 700PE 4.5 700PW
Heater
- phase/voltage [50 Hz/VAC] ~1, 230 ~1, 230 ~3, 400
AVS 250
- power consumption [kW] 1,2 3,0 4,5
Fans
- phase/voltage
[50 Hz/VAC] ~1, 230 ~1, 230 ~1, 230 ~1, 230
exhaust
- power/current [kW/A] 0,168/1.4 0,168/1.4 0,168/1.4 0,168/1.4
- speed [min
-1
] 3230 3230 3230 3230
supply
- power/current [kW/A] 0,168/1,4 0,168/1,4 0,168/1,4 0,168/1,4
- speed [min
-1
] 3230 3230 3230 3230
- control input [VDC] 0-10 0-10 0-10 0-10
- protection class IP-54 IP-54 IP-54 IP-54
Total power consumption - power/current [kW/A] 1,54/8,34 3,34/15,84 4,84/9,34 0,34/2,84
Automatic control integrated + + + +
Thermal efficiency 90% 90% 90% 90%
Insulation of walls [mm] 30 30 30 30
Cross-section of the power supply cabl [mm²] 3x1,5 3x2,5 5x1,5 3x1,5
Circuit breaker*
Poles 1 1 3 1
I [A] B6 B16 B10 Fuse 5A
6. CONSTRUCTION
10
1 - Plate heat exchanger; 2 - Supply fan; 3 - Exhaust fan; 4 - By-pass
damper
; 5 - Electrical/water heater/pre-heater; 6 - Control board; 7 - Ex-
tract air filters (panel/pocket); 8 - Supply air filter (panel/pocket).