EN |
7
RIRS 400-700 V EKO 3.0 v2019.06
10. UNPACKING
Accessories may be packed together with the product. Prior to transporting the unit, first unpack the accessories.
• Remove the film from the unit.
• Remove the bracing packaging tape which keeps the protective profiles.
• Remove the protective profiles.
•After unpacking the unit, examine it to make sure that it it has not been damaged during transportation. The installation of damaged units is
prohibited!
• Verify that all ordered equipment are delivered before starting the installation. Any deviation from the ordered equipment must be reported to the
supplier of products.
11. STANDART PACKAGE OF COMPONENTS
RIRS EKO 3.0
400 VER
400 VEL
400 VWR
400 VWL
700 VER
700 VEL
700 VWR
700 VWL
KEY 291103
1
1
1
1
1
1
1
1
12. PLACE REQUIREMENTS
L
1,5xL
L
1,5xL
H
H
Min. distance to open the door - 1,5xL; Min. distance to open control box door - H > 400 mm.
13. MOUNTING
The protective film is intended to protect the unit during transportation. It is recommended to remove the film because other
-
wise oxidation signs may occur.
Before every heating season the condensate tube shall be filled with water as indicated during the first startup!
400mm
