EN |
3
AMBERAIR COMPACT RH v2019.08
2. SYMBOLS AND MARKING
Warning – pay attention
Additional information
Stick the auxiliary label on the unit (on an easily accessible place) or on the dashed place of a technical manual in order to keep the important
information about the unit.
LN: XX000000
2019.01.01
LN: XX000000
2019.01.01
Figure 2.1 - Technical label
1 - Logo; 2 - Product code (SKU); 3 - Product name; 4 - Technical data; 5 - Production place; 6 - Batch number and production date; 7 - Serial
number.
Figure 2.2 - Indication for duct connection.
ODA - outdoor air; SUP - supply air; ETA - extract air; EHA - exhaust air.
Units tested and produced according to EC directives
AmberAir Compact range is Eurovent certified product
SALDA – associated member of the Eurovent association (Europe’s Industry Association for
Indoor Climate (HVAC), Process Cooling, and Food Cold Chain Technologies)
VDI 6022
AmberAir Compact SD50+ units designed of the VDI 6022 Part 1 guideline (Hygiene require-
ments for ventilation and air-conditioning systems and units)
SALDA world like to inform you that based on the Commission Regulation (EU) No 1253/2014 for
enforcing directive 2009/125/EC (hereinafter referred to as ErP diretive), the operational area of
certain AHU within the European Union is regulated by certain conditions.
The AHU can only be used within the EU when it meets the requirements of the ErP directive.
If certain AHU doesn’t have CE mark on it, use thereof is strictly prohibited in the EU.
3. SAFETY INSTRUCTIONS AND PRECAUTIONS
Device is manufactured in compliance with the following directives:
• Machinery Directive, 2006/42/EC;
• Low Voltage Directive (LVD) 2014/35/EU;
• EMC Directive (EMC) 2014/30/ES;
• Ecodesign Directive, No 1253/2014.
Read these instruction very carefully before installing and using this equipment. Installation, connection and maintenance should be carried out by
a qualified technician and in accordance with the local rules and legal acts.
The company shall take no responsibility for injuries suffered by people or for damaged property, if the safety requirements are not followed
or the device is modified without the permission of the manufacturer.
