EN |
23
AMBERAIR COMPACT RH v2019.08
BMS (Modbus)
+
BMS (BACnet)
o
○ – Required additional components: CO
2
and moisture sensors, switches, etc.
+ - standard feature (the number of features depends on the ventilation unit in which the automatics are used); to be configured through BMS
network or remote control console
x - Remote control consoles
* - depends from AHU version and selected components
7.4. DESCRIPTION OF THE UNITS FUNCTIONS
All functions indicated in this section are installed in the software of the control board. However, operation and control of the device depends on
the following:
1.
Selected control panel. Full functionality and configuration possibility can be assured only by MB-Gateway web interface SA-Control, SALDA
AIR app.
2. Connected external devices: external heaters, dampers, sensors and etc. (see the description of the acquired air handling system).
3. Internal components of the device: type of heat exchanger (plate or rotor), integrated dampers, sensors and etc. (see components of the
chosen device).
4. Control board type.
Air Handling Unit uses MCB board.
The unit can be configured only with SA-Control remote con trol panel, MB-Gateway web application or SALDA AIR app.
The following control board functions can be fully con trolled only with SA-Control remote con trol panel, MB-Gateway
web application or SALDA AIR app. In case of Stouch remote con trol panel use the description of remote control panel
functions for MCB control board.
8. ACCESSORIES
Stouch
TP-Link TL-
WR802N
MB-Gateway
S-RCO2-F2
S-RFF-U-
D-F2
S-KFF-U
S-KCO2
UG-3-A4O
incl VR-0,6M
IR24- P
PA-
TROL_701
PS600B
774411
TJ1TE-NTC
SPS
NFA
NM230A-TP
RMG
VVP
VXP
STP-CI
LJ/E
SSK
ABV
SKG
LSVF
MPL
AKS
FMK
Stogelis CB
FRWC
SSP
OC
EKS NIS
SVS
RSVS
FLEX MCB
Comfort Box SA-Control
SSB
SSC
STA
RFA Com-
pact 7RH
TS1C0P
REHI
RREHI
RWC
RRWC
FRWC
SSK
SPD
