Salamander UNIFI Assembly Instruction Download Page 1

Page: 1 / 4

Salamander Unifi Meeting Table 1 of 4

501-750 [9.20]

UNIFI™ MEETING TABLE

Assembly Instruction

LIMITED WARRANTY FOR COMMERCIAL UNIFI MEETING TABLE

Salamander is proud to stand behind our products with industry-leading warranties. Should you ever encounter

any problem with your Salamander product, let us know. We are here to make it right. 1.860.761.9500

Full warranty including limitations and warranty claim information may be found at

www.salamandercommercial.com/warranty

Summary of Contents for UNIFI

Page 1: ...NG TABLE Salamander is proud to stand behind our products with industry leading warranties Should you ever encounter any problem with your Salamander product let us know We are here to make it right 1...

Page 2: ...Slide the two halves together and make sure the front base surfaces are flush C Insert two 1 4 20 x 2 joint connector bolts through the top holes and two bolts through the third hole from the bottom S...

Page 3: ...t Spline into the Joint Pocket as shown above C Place the two table segments on top of the base and push the two together while aligning the Joint Pockets D Install Joint Pocket Kits where access is a...

Page 4: ...ed to remove a panel Lift up and out Lift Off Panel Panel Lock If desired FIGURE 3 Table Support 1 4 20 x 1 Button Head Socket Cap Screws FIGURE 1 Using the Hex Key provided attach the table top to th...

Brands by name