Sakai SV204 Series, Operating & Maintenance Instructions

Page: 97 / 100

– 91 –
4 SPECIFICATIONS
Model SV204TF
Mass
Operating mass
5,435 kg (11,980 lbs)
On front axle 2,975 kg (6,560 lbs)
On rear axle 2,460 kg (5,425 lbs)
Dimension:
Overall length
4,210 mm (166”)
Overall width 1,570 mm ( 62”)
Overall height 2,615 mm (103”)
Wheelbase 2,330 mm ( 92”)
Wheel
Front
Roll (dia. x width)
Smooth 1,090 x 1,370 mm (43” x 54”)
Pad 1,050 x 1,370 mm (41” x 54”)
Rear Tire
11.2-20-6PR
Performance
Travel speed
0–7.6 km/h (0–4.7 mile/h)
Vibrating power
Frequency
30 Hz (1,800 vpm)
Centrifugal force 74kN (16,185 lbs)
Gradability 41% (22°)
Rolling width 1,370 mm (54”)
Minimum turning radius 4.1 m (162 ”)
Engine
Model
KUBOTA “V3307-CR-T-EF05”
Diesel Engine
Total displacement 3.331 litres (203.3 cu.in)
Rated output 54.6 kW / 2,200 min
-1
(73 HP / 2,200 rpm)
Max. torque 261 N·m / 1,500 min
-1
(193 ft-lb / 1,500 rpm)
Tank capacity
Fuel tank
100 litres (26.4 gal)
Hydraulic oil tank 38 litres (10 gal)
NOTE: 1) Gradability is the calculated value. It may vary with ground surface conditions.
2) According to European Standerds (EN500-1, ISO 6165, etc.), the mass are defined as follows.
Operating mass : Fuel=50%, Water=50%, Operater=75kg.
(4) SV204TF