Sakai SV204 Series, Operating & Maintenance Instructions, Page: 90 / 100

3 PERIODICAL MAINTENANCE
– 84 –
3.6 Feeding Water and Lubricants
(1) General rules
1) Never feed water or lubricant with the strainer removed.
2) Use recommended lubricant and hydraulic fluid.
3) Do not use lubricants and hydraulic fluid of different brands.
4) When replacing oil, drain it completely and clean the container with flushing oil before filling
new oil.
5) Be sure to use fuels and greases designated/recommended by SAKAI. Faulty due to the
use of those not designated/recommended by SAKAI is out of the scope of repair and
guarantee.
(2) Capacity
(3) Rating
Compartment Type of fluid Capacity in liters (gal.)
Fuel tank Diesel oil 100 (26.4)
Engine oil pan Engine oil 11.2 (3.0)
Hydraulic oil tank Hydraulic oil 38 (10.0)
Wheel motor Gear oil 1.6 (0.4)
Radiator Coolant 6.7 (1.8)
Vibrator Gear oil 4.0 (1.1)
Differential
Gear oil 8.3 (2.2)
Final drives
Gear oil 0.9 x 2 (0.22 x 2)
Lubricant
Service
classification
Ambient temp. and applicable viscosity rating
Applicable
standards
-15 – 30°C
(5 – 86°F)
Cold
0 – 40°C
(32 – 104°F)
Moderate
15 – 55°C
(59 – 131°F)
Tropical
Engine oil
API grade CJ4
JASO DH-2
SAE 10W-30 SAE 30 SAE 40 MIL-L-2104D
Gear oil API grade GL5 SAE 80W-90 SAE 90 SAE 140 MIL-L-2105
Hydraulic oil Wear resistant
ISO-VG32
over VI 140
ISO-VG46
over VI 140
ISO-VG68
over VI 110
ISO-3448
Grease Lithium type extreme pressure NLGI-2
Fuel Diesel fuel ASTM D975 No.2-D S15