Sakai SV204 Series, Operating & Maintenance Instructions

Page: 36 / 100

2 OPERATION
– 30 –
Horn switch
Pressing the button at the center of the steering wheel
makes the horn sound.
Vibration Selector Switch
Selection can be mode between the vibrator switch
installed to the Forward-Neautral-Reverse lever and the
other one located on the panel.
position : Vibration can be turned ON or OFF
with the switch located on the Forward-
Neautral-Reverse lever. Pressing this
switch causes the vibration to start and
pressing it again to stop.
position : Vibration is shut down.
CONT position : Have this switch placed at this position
when vibration is not to be actuated.
NOTE: For vibratory rolling, run the engine at 1,800 rpm or higher.
IMPORTANT
• Do not operate the vibrator on a hard area such as cement concrete pavement
surface or the ground covered by thick steel sheets.
• Keep the vibrator stopped when the machine is at rest.
• Shut off the vibrator immediately when the machine has been caught in the mud
during vibratory operation.