R5
Series
- 19 -
4.3.2 Installation Position
Do not expose the inverter to direct solar irradiation as this could cause power
derating due to overheating. The ambient temperature should be between -40°C
～
+60°C
（
-40° F
～
140° F
） （
This temperature range is not equivalent to the
temperature range required by the battery pack
）
to ensure optimum operation.
Choose locations with sufficient air exchange. Ensure additional ventilation, when
necessary.
To make sure the installation spot is suitably ventilated, if multiple SAJ grid-tied
solar inverters are installed same area, the following safety clearance in Figure 4.2
shall be followed for proper ventilation conditions.
30
CM
50CM
50CM
30CM
30
CM
4.2 Installation Position
4.4 Mounting Procedure
4.4.1 Mark the Positions of the Drill Holes of the Rear Panel
The mounting position should be marked as shown in Figure 4.3,Figure 4.4 &
Figure 4.5.
