CUT SHEET:
SAGEGLASS SWITCH
The SageGlass
®
Switch provides manual override control for one or more zones of insulating glass units (IGUs). The
SageGlass Switch includes a user interface keypad and mounting kit for installation in a single or multi-gang box. The keypad
is typically located in the same room that contains the SageGlass IGUs, but this is not a requirement. One or more switches
can be used to control the same zone of IGUs; similarly, one switch may control multiple zones.
PRODUCT
OVERVIEW
The SageGlass Switch contains a tint button, clear button and five LEDs: Automatic Mode,
Full Clear, Level 1, Level 2 and Full Tint. The buttons are used to control the SageGlass IGUs while
the LEDs indicate the current IGU tint level.