Property of SainSmart.com. Unlawful to copy or reproduce in any manner without the express written consent.
SainSmart Coreception 3D Printer Trouble Shooting
1. Cura settings (specifically print head size settings and why they are)
There is a known bug for the x-min and the y-min. These settings are used to set the hot
end size for the options to print all at once or island. This is not a concern with the
coreception as the print dimensions takes into account the size of the print head.
·For versions that do not allow the recommended settings use the below:
·x min = 0
·y min = -10
·x max = 10
·y max =10
