System and Navtex app installation
98-139768-A
Chapter 4: Configuration
4-3
4444
Configuration
To install an app, do as follows:
1. Tap
Available
to display the apps that are available to this SAILOR 6004 Control Panel.
2. Tap the app you want to install.
• Tap the app name, e.g.
Navtex
Version 1.0.
•
Install
to install this app on the SAILOR 6004 Control Panel.
3. Enter the password for user level (user) and tap
OK.
To manage an already installed app, do as follows:
1. Tap
Installed
to display the apps that are installed on this SAILOR 6004 Control Panel.
2. Tap the app you want to manage. For each app there are the following items:
• App name and version, e.g. Navtex Version 1.0.
•
Update
(if available, else grayed out) – tap here to update this app. Enter the
password for user level and tap
OK.
•
Uninstall
– tap here to uninstall this app from the SAILOR 6004 Control Panel.
3. Enter the password for user level (user) and tap
OK.
Self Test
Tap
Self Test
to start the self test of the SAILOR 6004 Control Panel. For further details on
the self test see the installation manual of the SAILOR 6004 Control Panel.
About
Tap
About
to view the following:
•
Legal
with legal and copyright information, open source licences, etc.
•
Version
with software versions and serial number of the SAILOR 6004 Control Panel.
•
Network
with IP address and MAC address of the SAILOR 6004 Control Panel.
4.2.2
Navtex app – daily use
The daily use of the Navtex app is described in the user manual for the SAILOR 6390
Navtex Receiver.
Figure 4-3: System – Applications (example)