Sailor 6248 VHF, Installation Manual

Page: 36 / 104

Connectors
2-16 Chapter 2: Installation 98-132904-C
2.3.6 Ethernet connector: LAN
There is one Ethernet (10/100 MB) connector on the rear panel, it is marked LAN.
Connector type: RJ-45 female, shielded
2.3.7 Power connector PWR FUSE
The DC Power input connects to a DC supply with 12 DC nominal (10.8 to 15,6 V DC). The
connector has a 10 A fuse. The interface also has a “remote on/off” function for a
remote 24 V — 12 V DC Power Converter.
Connector type: LTW Power
Fuse: 10 A mini ATO
To help extract the fuse you can order a fuse puller in the ESHOP at
http://extranet.thrane.com/ .
Pin-out
The figure and table below show the connector outline, pin assignments and wire color
in the power cable delivered with the SAILOR 6222 VHF DSC.
Pin number Pin function Wire color
1 Tx+ white/orange
2 Tx- orange
3 Rx+ white/green
4 Not connected blue
5 Not connected white/blue
6 Rx- green
7 Not connected white/brown
8 Not connected brown
Table 2-6: Pin allocation, LAN connector
Pin Pin function Wire color
1 DC+ (10.8 - 15,6 V DC) Red
2 DC- (0 V DC) Blue
3 Remote on/off Yellow
Table 2-7: Pin allocation, power