Chapter 3: Connectors & controls
14
Connectors
3.1.4 DC Power input 12—24 V DC (PWR)
The DC Power input connects to a DC supply with 12—24 V DC nominal (10.8 to
31.2 V DC). The Power connector is a custom connector; a matching cable with
connector is included in the delivery.
The figure and table below show the connector outline on the Control Panel,
pin assignments and wire color in the power cable delivered with the Control
Panel.
Connecting DC power
Connect DC+ (red wire) to DC out + from your DC supply.
Connect DC- (black wire) to DC out - from your DC supply.
Do not connect the white wire nor the blue wire in the power cable, unless you
want to use the Remote on/off function or the On/off control function.
If the unit is to comply with 60950-1 safety regulations, the power cable must
be supplied with an extra inline fuse similar in value to the one located inside
the device.
Pin
Pin function
Wire color
in power cable
1
DC+ (10.8 - 31.2 V DC)
Red
2
DC- (0 V DC)
Black
3
ON_IN
White
4
ON_OUT
Blue
Front view on Control Panel
lock, 4 pin male
ControlPanel.book Page 14 Thursday, January 3, 2013 12:28 PM
