SAIC MG 6 Service Manual Download Page 120

Page: 120 / 357

High Line Player

Inserting and Removing a USB Storage
Device

Inserting a USB Storage Device

One of the USB ports is in the storage compartment,
another is on the system control panel, insert the USB
device into a USB port for connection.

Removing the USB Storage Device

Check and confirm that there is no data being accessed,
then pull out the USB storage device.

Note: Compatibility with all USB storage devices is not
guaranteed.

Note: This entertainment device may not achieve
optimum performance when using some USB storage
devices.

Note: Connection via a USB hub is not possible.

Inserting and Removing an AUX
Connector

Inserting an AUX storage device

The AUX port is in the storage compartment, insert the
AUX cable connector into the AUX port for connection.

Removing the AUX storage device

Check and confirm that no data is being accessed, then pull
out the AUX connector.

Note: AUX cables are not supplied with the vehicle.

Note: Compatibility with all AUX storage devices is
not guaranteed.

Note: This entertainment device may not achieve
optimum performance when using some AUX storage
devices.

102

Summary of Contents for MG 6






































































































































































































































































































































































Search results

Summary of Contents for MG 6

Reviews:

Brands by name

Popular brands

SAIC MG 6, Service Manual

Search results

Summary of Contents for MG 6

Reviews:

Brands by name

Popular brands