SAIC MG 6, Service Manual

Page: 117 / 357

High Line Player
Basic Operation
Power-On/Off
To protect the screen against damage,
always touch the panel buttons with your
. A touch pen may be used for special
calibration. The touch pen shall not be used
for normal operation. The screen will not
display the boot screen at power-on in stand
by mode.
Power-On
If the vehicle power is turned off with the system in
playback mode last time, the system will be automatically
powered on when the vehicle power is turned on again.
If the vehicle power is turned off with the system in off
mode last time, short press the power button on the
system control panel for power-on after the vehicle power
is turned on again.
With the system ON, press and hold the power button on
the system control panel for greater than or equal to 10
seconds, and the system will be automatically rebooted.
Power-Off
Turn off the vehicle power, and the system is automatically
powered off.
Stand By Mode
Short press the [Power Button] to place the entertainment
system in stand by mode, the operation of the system will
be suspended.
All sounds will be muted in the stand by mode.
99
4