Maintenance
Bonnet
Opening the Bonnet
DO NOT drive when the bonnet is retained
only by the safety catch.
A
B
1 From driver side, pull the bonnet release handle
(shown in figure A).
2 Push the lever left forward mounted on the locking
platform to release the bonnet safety latch (shown
in figure B).
3 Raise the bonnet and supported with the support rod
firmly.
Closing the Bonnet
Release the support rod and settle it properly with one
hand, meanwhile support the bonnet with the other
hand.
Then lower down the bonnet with both hands
until the distance between it and the locking platform is
approximately 40cm, push with a downward force to fully
close the bonnet.
By attempting to lift the front edge of the bonnet, check if
the lock is fully engaged after closing the bonnet.
146
