SAIC MOTOR MG HS, Manual

Page: 54 / 319

Instruments and Controls
Lighting Lever Switch
Take care not to dazzle oncoming vehicles
when
switching between main beam
headlamps and dipped beam headlamps.
1
3
4
2
Direction Indicators
Move the lever down to indicate a LEFT turn (1). Move the
lever up to indicate a Right turn (2). The corresponding
GREEN indicator lamp in the instrument pack will flash
when the turn signal lamps are working.
After resetting the steering wheel, the lever will be
automatically reset, and the turn signal lamps go off. But
if the steering wheel angle is small, manually reset the
lever to turn off the turn signal lamps. If the lever angle
is small, it will be reset immediately. And the turn signal
lamps and direction indicators flash three times and then
automatically go off.
Main/Dipped Beam Headlamps Switching
With the ignition switch in position ON and the dipped
lamps illuminated, push the lever (3) towards the
instrument panel to operate main beam headlamps, and
the main beam indicator in the instrument pack illuminates.
Push the lever (3) once again to switch to dipped beam
headlamps.
Main Beam Flash
To briefly flash the main beam on and off, pull the lever (4)
towards the steering wheel and then release.
40