SAIC MOTOR MG HS, Manual

Page: 51 / 319

Instruments and Controls
Lights and Switches
Master Light Switch
3
2
1
4
1 AUTO Lamp
2 Side Lamp/Switch Backlights
3 Headlamp
4 Light Off
AUTO Lamp
With the ignition switch in position ACC, the AUTO
lighting system will be defaulted as ON (1). The AUTO
lighting system will automatically switch the side lamps and
switch backlights on and off according to the intensity of
current ambient light.
With the ignition switched to ON position, the AUTO
lighting system will automatically switch the side lamps,
switch backlights and dipped beams on and off according
to the intensity of current ambient light.
Note: This function uses a light sensor that monitors
exterior ambient light levels.
The sensor for some
models is fitted in front of the instrument panel near
the windscreen. DO NOT mask or cover this area.
Failure to adhere to this may result in headlamps
operating when not necessary.
Side Lamp and Switch Backlights
Rotate the master light switch to position 2 to switch on
the side lamps and switch backlights. With the ignition
switch in position OFF, if the side lights are on and the
driver's door is opened, an audible alarm will sound.
37
1